The Techna Clip catalogue

Transform your concealed carry experience with Techna Clip!

Fifteen Techna Clip conceal carry belt clips across nine firearm families. Start from the pistol, find its family, and read the model on the card against the model on the gun. Every Techna Clip here is a minimalist holster alternative cut for one frame.

Key Features and Operating Principle

Every Techna Clip conceal carry belt clip in this catalogue works the same way. A shaped arm of high-carbon spring steel is fixed to the pistol, and the free end of that arm hooks over the top of a waistband or a pocket edge. The pistol hangs from the clip; the clip is held by the belt or by the fabric itself.

Every gun belt clip below is an alternative to traditional holsters rather than a smaller one: the steel replaces the shell instead of thinning it. A gun belt clip of this kind carries flat, and the Techna Clip store lists the same range on Amazon for anyone whose pistol is not on these shelves.

Because the arm is thin and follows the outline of the gun, the carried package is barely wider than the gun, which is the entire reason for choosing a Techna Clip over a moulded shell. Retention comes from the spring tension of the arm against the waistband, not from friction against a holster body, so it does not fade as leather does and does not need a screw to be adjusted.

Two names appear in the titles and they are not interchangeable. A belt clip is the plain form: one arm, one mounting point. A concealment system is the heavier variant for pistols whose frames give the steel more to hold on to. Both are made from the same spring steel, and both leave the trigger guard exposed.

One more thing worth saying on a catalogue page. A Techna Clip is a concealed carry belt clip, not a holster, and the trigger guard stays open on every model here. That is the trade the whole range is built on: the thinnest possible package in exchange for the carrier keeping the waistband clean and reseating the pistol with the eyes on it.

1911 and Smith & Wesson Shield

The Techna Clip 1911 Full Size belt clip, the Techna Clip 1911 .45 ACP high carbon spring steel gun clip and the Techna Clip Smith Wesson Shield gun belt clip.

Techna Clip gun belt clip kit for the Smith & Wesson Shield: black slotted spring steel arm, mounting block, three screws, three lock washers and a hex key on white

Techna Clip Smith Wesson Shield Gun Belt Clip

Techna Clip right-side conceal carry belt clip in black steel running along the frame of a full-size Springfield Armory 1911 with cocobolo grips

Techna Clip 1911 Full Size Conceal Carry Belt Clip

Close-up of the Techna Clip concealment system in high-carbon spring steel fitted to the right side of a 1911 in .45 ACP with cocobolo grips

Techna Clip 1911 .45 ACP High Carbon Spring Steel

Glock, Taurus and Smith & Wesson Bodyguard

The Techna Clip Glock Models kit, the Techna Clip Taurus G2 Slim clip and the Techna Clip Bodyguard 380 conceal carry belt clip.

Techna Clip ambidextrous gun belt clip kit for Glock models: black slotted spring steel arm, mounting block, three screws, three lock washers and a hex key on white

Techna Clip Glock Models Concealable Gun Belt Clip

Techna Clip ambidextrous conceal carry belt clip in slotted black steel fitted along the slide of a Taurus PT111 G2 9mm pistol

Techna Clip Taurus G2 Slim Conceal Carry Belt Clip

Techna Clip gun belt clip in black spring steel mounted along the frame of a Smith & Wesson Bodyguard .380, the pistol shown ghosted so the clip stands out

Techna Clip Bodyguard 380 Conceal Carry Belt Clip

Sig Sauer, Springfield XD-S and Glock 42

The Techna Clip Sig Sauer P238 clip, the Techna Clip Springfield XD S MOD 2 clip and the Techna Clip Glock 42 conceal carry belt clip.

Techna Clip right-side conceal carry belt clip for the Sig Sauer P238 in .380, shown on a ghosted outline of the pistol

Techna Clip Sig Sauer P238 Conceal Carry Belt Clip

Techna Clip ambidextrous belt clip kit for the Springfield XD-S: slotted black spring steel arm, rail mount, two screws and a hex key on white

Techna Clip Springfield XD S MOD 2 Conceal Carry

Techna Clip ambidextrous conceal carry belt clip in black steel fitted along the slide of a Glock 42 in .380, the pistol shown ghosted grey

Techna Clip Glock 42 Conceal Carry Belt Clip

Ruger LC9, Springfield MOD.2 and Kahr

The Techna Clip Ruger LC9 gun belt clip, the Springfield MOD.2 and XDM version and the Techna Clip Kahr 9mm 40 45 conceal carry belt clip.

Ruger LC9 9mm pistol shown from the left on a grey background; the Techna Clip right-side gun belt clip this card lists is mounted on the far side and is not visible in the photograph

Techna Clip Ruger LC9 Gun Belt Clip (Right-Side)

Techna Clip right-side conceal carry belt clip in slotted black steel fitted along the slide of a Springfield Armory XD, the pistol shown ghosted grey

Techna Clip Springfield MOD.2 XDM Conceal Carry

Techna Clip conceal carry belt clip kit for Kahr pistols: slotted black spring steel arm, mounting block, two screws and a hex key on white

Techna Clip Kahr 9mm 40 45 Conceal Carry Belt Clip

Diamondback and Ruger Concealment Systems

The Techna Clip Diamondback DB9 DB380 spring steel gun clip, the Techna Clip Ruger LC9 high carbon spring steel gun clip and the Techna Clip Ruger LC9S EC9S belt clip.

Techna Clip concealment system kit for Diamondback DB9 and DB380 pistols: black spring steel arm, mounting block, two screws and a hex key on white

Techna Clip Diamondback DB9 DB380 Spring Steel Gun

Techna Clip concealment system kit for the Ruger LC9: black spring steel arm, pin, two thread-locked screws and a hex key on white

Techna Clip Ruger LC9 High Carbon Spring Steel Gun

Techna Clip conceal carry belt clip kit for the Ruger LC9S and EC9S: black spring steel arm, mounting block, two screws and a hex key on white

Techna Clip Ruger LC9S EC9S Conceal Carry Belt Clip

Black slotted Techna Clip mounted on the slide of a pistol with a tan slide and a camouflage grip, seen close up

Checking Fitment Before Ordering

Manufacturers revise fitment lists as new generations of a pistol appear, so the listing is the authority and this page is the index. Three checks take a minute and save a return.

First, the model family: Shield is not Bodyguard, LC9 is not LC9S, XD-S is not XD(M). Second, the generation or model designation stamped on the slide or the frame, because a clip cut for one generation may foul the slide of the next. Third, the side, from the bracket at the end of the card title — a right-side clip cannot be changed to a left-side one after it is fitted.

Fitting itself takes minutes and no gunsmithing. The order of work is always the same and never negotiable: unload the firearm, drop the magazine, lock the slide back, confirm the chamber is empty by sight and by touch, then pick up a tool. Afterwards the steel needs almost nothing but a wipe with an oiled cloth.

If nothing here fits, the Techna Clip store is the place to look next. A gun belt clip for a frame introduced after this catalogue was built will appear in the brand’s own storefront before it appears anywhere else.

Techna Clip Gun Belt Clips — FAQs

How do I know which Techna Clip fits my pistol?

Start from the firearm family named in the card title, then confirm the generation or model designation stamped on your slide or frame against the manufacturer’s fitment table on the listing. The catalogue on this page is the index; the listing is the authority, because fitment tables are revised when new pistol generations appear.

What is the difference between a belt clip and a concealment system?

A conceal carry belt clip is the plain form: one arm, one mounting point, hooked over the waistband. A concealment system is the heavier variant for pistols whose frames give the steel more to hold on to, and the manufacturer names it that way in its own listing titles. Both are made from the same high-carbon spring steel and both leave the trigger guard exposed.

Right-side or ambidextrous — which should I buy?

A right-side clip mounts on the right flank of the pistol and is intended for strong-side carry by a right-handed shooter. An ambidextrous clip can be mounted on either flank, which suits a left-handed carrier and anyone who moves between hip and appendix positions. When a family offers both, the ambidextrous version is the safer purchase for a first clip, because the side cannot be changed once the clip is fitted.

Does fitting a Techna Clip modify my firearm?

No. The clip either replaces an existing pin or screw with the one supplied, or hooks onto the slide rail and is captured by the frame. Nothing is drilled, filed or glued, and refitting the original part returns the pistol to standard.

What does a clip not do that a holster does?

A holster shell covers the trigger guard; a clip leaves it open. That places the responsibility for trigger coverage on the carrier and on the clothing. A clip-carried pistol belongs in a clean waistband with nothing loose that can reach the trigger, and it suits a pistol with a manual safety or a long, heavy trigger better than one without.

Ready to Upgrade Your Carry?

The Techna Clip store on Amazon carries the brand’s full current range, including fitments introduced after this catalogue was last revised. If a pistol is not on the shelves above, the Techna Clip store is the right next place to look.